Boot Scootin Spooky DTF T-Shirt Transfer

DTF T-Shirt Transfer only.  No T-shirt or application tools are provided.  You MUST have a heat press to transfer it onto a shirt.  (An initial pre-press of the garment prior to the transfer press can be helpful to remove any wrinkles and slight moisture from the fabric in higher humidity environments).  Preheat heat press, place the DTF print on the garment, with the ink and glue side of the film directly against the fabic, positioned exactly where you want it transferred.  Press the transfer onto the fabric using the temperature, pressure and duration listed below.  Remove the garment from the heat press, lay it on a clean, flat, hard surface and carefully peel the film away from the garment at a moderate rate.  Place the shirt back on the heat press with a sheet of parchment or Kraft paper between the shirt and the top of the heat press.  Then perfom a final "finish" press for the duration shown below at the same temperature and pressure as the transfer.  This further cures the surface of the print and creates a smoother transition between ink and fabric.   The transfer process is complete!

• Cotton Temperature (F) 300-330 Degrees
• Polyester Temperature (F) 260-280 Degrees
• Press at 50-70 PSI
• Transfer Press Time 20-30 Seconds
• Final Press Time 10-20 Seconds